User manual

Connecting
the Product
1. Connect the earphones to the earphone jack.
06
Connecting Earphones
1. Turn on the power of the device and computer.
2. If you connect the device to your computer, you will see the screen
where you can select connection mode.
- Power & Data: The connection between the product and the
computer is established and you can start transferring data.
- Power & Play: The product is currently being charged and a file is
being played.
- Power Only: The product is currently being charged.
Connecting to Your Computer
Do not use cables other than the USB cable provided. It may cause malfunction.
For successful computer/USB connection, disable all functions.
Check that the product is connected to a high-power USB 2.0 port. Connecting to a
keyboard or a USB hub without a power supply of its own may result in malfunction.
File system does not support other than FAT32. Format this device into FAT32.
Turn the product off when charging. Leaving the device turned on during recharge
may prevent “Charge Complete” from being displayed.
The battery will be fully charged within about 4 hours 30 minutes. (Based on fully
discharged, power Off).
Charging times may vary if device is used during recharge.
Charge and store the product only at room temperature. Do not expose the device to
extremes in temperature while recharging. The rechargeable battery is a consumable
and the available usage time of charged battery becomes shorter over time.
Getting Started