User manual

Power
Management
1. Press and hold the [ ] until power comes on.
2. If you press and hold the [ ] when the product is turned on,
then the power will be turned off.
05
Power on/off
This model supports an automatic power-saving feature to minimize battery
consumption. Depending on [SETTING – Timer Settings - Auto Power off], the
product will be automatically turned off when keys are not operated for a specified
time. (Refer to page 25)
Even if you use reset function, current time and memory data will be preserved.
Do not use reset function while the product is playing. It may cause severe damage
to its memory.
1. If you press the [ ] button while using the device, it will be locked.
2. Unlock the device by pressing the [ ] button again.
Using the Hold Function
1. If buttons will not work while the device is being used, open the
cover of Micro SD card slot to release the cap and then press [RESET].
Using the Reset Function
To avoid malfunctions, only use the USB cable provided.
Verify that the product is connected to a high-power USB 2.0 port. Some low-power
USB ports built into certain peripheral devices, such as some types of keyboards
and USB hubs without internal power may not provide enough power to charge.
While the PC is switched to standby mode, the product may not be charged.
1. Turn on your computer.
2. Connect the product to your computer. The internal battery will
charge automatically.
Charging the Battery
Getting Started