DESIGN BY IRIVER E300 USER GUIDE
CON TE N T S 01 03 Getting Started Other Information Components 03 Important Safety Information 27 Locating the Controls 03 Troubleshooting 28 Power Management 05 Copyrights 29 Connecting the Product 06 Certification 30 Using iriver plus 4 09 Registered Trademark 30 Exemption 30 02 Using E300 Home Screen 12 MUSIC 13 VIDEO 15 PICTURE 17 FM RADIO 18 RECORDING 20 TEXT 22 BROWSER 23 SETTING 24 FITNESS 25
Components Components may be changed without prior notice for improvement of product performance or quality. Quick Start Guide & Product warranty E300 Earphones USB Cable Earphones: You can connect this to the product to output sound. USB Cable: You can connect this to the computer and use it to recharge the power. Quick Start Guide: This is the manual explaining how to use our device. Product Warranty: Please keep this in a safe place for use during any warranty repairs.
LCD Volume + Volume - Speaker Up Sub Menu Select Down Upper Menu/Previous MIC Necklace Connection Loop: Connects with the necklace. Power: Turn off the power by pressing and holding. Switch to standby mode by pressing briefly. You can switch to the standby mode by pressing it briefly. Line-In Jack: Connects external device when Line-in recording. Earphone Jack: Connect earphone here. USB Port: Connect to computer or recharge the battery using this port. RESET: Resets the product.
Power Management Power on/off 1. Press and hold the [ ] until power comes on. 2. If you press and hold the [ ] when the product is turned on, then the power will be turned off. This model supports an automatic power-saving feature to minimize battery consumption. Depending on [SETTING – Timer Settings - Auto Power off], the product will be automatically turned off when keys are not operated for a specified time. (Refer to page 25) Using the Hold Function 1.
Turn the product off when charging. Leaving the device turned on during recharge may prevent “Charge Complete” from being displayed. The battery will be fully charged within about 4 hours 30 minutes. (Based on fully discharged, power Off). Charging times may vary if device is used during recharge. Charge and store the product only at room temperature. Do not expose the device to extremes in temperature while recharging.
Disconnecting from your computer 1. Safely disconnect the product from your computer by clicking the icon on the taskbar of the computer screen. 2. Confirm the device disconnection by clicking [Confirm]. Depending on the operating system for example Windows XP, the icon may be hidden from the taskbar. Hidden icons can be displayed by clicking indicator. Safe disconnection may not be performed if application programs such as Windows Explorer or Windows Media Player are being used.
Deleting Files (Folders) from the Product 1. Select the files/folders to be deleted, right-click on them and select [Delete]. 2. Click [Yes] when the [Confirm File/Folder Deletion] window pops up, and the selected files/folders will be deleted. Inserting/removing the Micro SD card 1. Turn the power off, place the SD card (see the figure below) in the SD card slot, and press gently. 2. Press it in once more and the card can be removed.
Insert/remove the Micro SD card while the power is off. Do not force the Micro SD card. It may cause malfunction and damage to the Micro SD card. Do not remove the Micro SD card when in use. It may delete data, cause malfunction, or damage the Micro SD card. Please do not repeatedly insert/remove the Micro SD card. If the Micro SD card is not positioned properly, the product may malfunction or the card may become stuck. Use only the recommended Micro SD cards.
Windows® Vista Specifications (For Windows® Vista, note that only the 32-bit version will be supported.) - Intel® Pentium® 800MHz or above - Memory: 512MB or above - 20MB or more free space - 16 bit Sound Card and Speaker - Microsoft Internet Explorer V 6.0 or above - SVGA or high-resolution monitor (min. 1024x768 resolution) Windows® 7 Specifications (For Windows® 7, note that only 32-bit version will be supported.
2. Select the file checkboxes you want to transfer from your computer to the Product and then click [Transfer] button or drag & drop the file to Device icon at the bottom or Device window. You will see the file transfer status in the [File Transfer] tab. 3. When the file transfer is complete, you will see the selected music files added to the device library. Initializing the Disc 1. Connect the device to your computer’s USB port and then execute iriver plus 4. 2. Select [Device > Initialize Disc].
Home Screen Home Screen Legend : Shows battery status. MUSIC: Plays music. (Pages 13~15) VIDEO: Plays video files. (Pages 15~17) PICTURE: Plays pictures. (Pages 17~18) FM RADIO: Listens to or record FM radio. (Pages 18~20) RECORDING: Records voice or sound from external device. (Pages 20~22) TEXT: Reads text files. (Pages 22~23) BROWSER: Checks the files stored in the product and Micro SD card. (Pages 23~24) SETTING: Sets the user environment.
Hotkeys provide convenient shortcuts for some modes only. MUSIC Selecting Music 1. If you select [MUSIC] on the home screen, you will see the music list. 2. Press the [ / / / ] button in the music list to select the music you want, and press the [ ] button or the [ ] button to play the selected music. : Move to the upper list/folder. : Move to the sub menu/folder. Play when selecting files. / : Move within the list. : Play the selected file. In [Dir List], music can be searched by folder.
LCD Display for Playing Music FITNESS Playing Mode Current status Lock mode Current time Battery Album art AB repeat File name Album name Play mode EQ Elapsed time Progress bar Rating Total playing time for the current file Additional Features 1. The list of additional features are displayed when pressing and holding [ ] while a file is being played. 2. Press the [ / ] button to select the additional feature and press the [ ] or [ ] button to display the window for setting it up.
SRS: Set virtual three-dimensional sound effect. TruBass: Set the extent of emphasis on low sound. FOCUS: Set the sound clarity level. WOW : Set amplification value according to the characteristics of the earphone being used. Definition: Restore missing sound to the level of original sound. + Fade In: Make an audio signal increase gradually when playing music. - Repeat Frequency: Set the repeat frequency. - Repeat Interval: Set the repeat interval.
Playing Videos - Press the [ ] button to control the volume. - While playing, press the [ ] button to pause / resume. - While playing, press the [ / ] button to play previous/next file. - While playing, press and hold the [ / ] button to fast reverse or fast forward. - While playing, press the [ ] button to change the play mode.
- Resume: Select whether video is resumed from the last played point or from the beginning. - Play Next File: Select whether the next file will be played when the name of file is in sequential order. - Add Bookmark: Bookmark a specific point of time. - Delete File: Delete the selected file. - Information: Display information for the selected file. PICTURE Selecting Picture 1. In the home screen, select [PICTURE] to display Picture Scan List.
Additional Features 1. While viewing pictures, press and hold the [ additional features. ] button to display 2. Press the [ / ] button to select the additional feature and press the [ ] or [ ] button to display the window for setting it up. : Move to the upper list. 3. Press the [ / ] button to set the feature up and press the [ ] or [ ] button to save / operate it. - Slide Time: Set the time each image is displayed in slide show - Rotation: Set the direction of rotation.
- Move to a higher-level or lower-level frequency signal that is receivable by setting the preset off and pressing and holding [ / ]. - Move to a higher-level or lower-level preset channel by setting the preset and pressing [ / ]. - While listening to radio, press [ ] to record the radio broadcasting you are listening. + Record the broadcast while listening by pressing the [ ] button and stop recording by pressing [ ] button again.
- Recording: You can record the radio broadcasting you are listening. + If you press the [ ] button, the recording will begin; press the same button once more, the recording will pause. If you press the [ ] button during recording, the recording will be terminated and the file will be recorded. - FM Recording Quality: Set FM recording quality. - Save / Delete Preset: Save the frequency signal being received currently to a channel.
The recorded file will be saved in the following format. Line-In: [Recordings > Line-In] AUDIOYYMMDDXXX.WMA Internal Mic: [Recordings > Voice] VOICEYYMMDDXXX.WMA External Mic: [Recordings > Voice] EXMICYYMMDDXXX.WMA (YY: year, MM: month, DD: day, XXX: Sequential number) The size for recorded files per minute according to recording quality is as below. Low: Approx. 480K / Medium: Approx. 720K / High: Approx. 960K Maximum recording time is 5 hours.
[Line-In] Option - Recording Quality: Set the quality of recorded voice via external input. - Auto Sync: Automatically start and ends recording according to the input volume during external recording. - External Input Volume: Set up the volume of external input. In the factory default setting, [Auto Sync] is set under the [Line-In] option. If you press [Line-In] and input sound, recording will automatically start. When the sound volume of external device sets to maximum, it may cause voice distortion.
Additional Features 1. In the Text screen, press and hold the [ additioanl features. ] button to display 2. Press the [ / ] button to select the additional feature and press the [ ] or [ ] button to display the window for setting it up. : Move to the upper list. 3. Press the [ / ] button to set the feature up and press the [ ] or [ ] button to save / operate it. - Skip to: press and hold [ / ] to move the location of text based on the designated percentage. - Auto Scroll Speed: Set the scroll speed.
Deleting File 1. In the file list screen, select the file and press and hold the [ button to display the confirmation message. ] 2. Once you select [Yes] using the [ / ] button and press the [ ] or [ ] button, the device will delete the selected file. SETTING You may set up your own user environment. The pre-installed menu structure may differ depending on the firmware version. Settings 1. Please select [SETTING] on the home screen. 2.
Timer Settings Auto Power Off: Power will be automatically turned off when there is no user activity, such as like manipulating the buttons or using the device, for a preset time. Sleep Setting: Power will be automatically turned off when the preset time is reached. Advanced Settings Rebuild DB: Rebuild database of files. Format Internal Memory: Delete all the data in internal memory. Format External Memory: Delete all the data in external memory. System Information: Display the device system information.
Taking Exercise 1. In the home screen, select [FITNESS]. 2. When pressing [ ], FITNESS mode will start. 3. When you press [ ], you can check the step, exercise distance and calories burned. 4. If you press [ ], you can pause the FITNESS mode. If you press [ ], you can stop the mode. While using the FITNESS feature you can use other features in the multitasking mode once you press the [ ] button for more than a few seconds. (Features supported in multitasking mode: MUSIC, FM RADIO, SETTING, HOME.
Important safety information Relating to the Product - If the same screen is turned on for a long time, there may be an after-image on the screen. - Do not allow metal (coins, hairpins, etc.) or foreign substances that burn easily to get inside the product. - Do not place heavy objects on top of the product.
- Accidents can happen, so use only in safe place. - When using while on the move, check if there are any dangerous obstacles. - There is a risk of electric shock during electrical storms. Avoid use if possible. - If tinnitus (ringing in the ears) occurs, reduce the volume or discontinue use. - Do not use for long periods at high volume. - Do not use headphones/earphones at high volume. - Be careful that headphones/earphones do not get caught or snagged in other objects.
+ There is poor FM radio reception with heavy noise. - Check for foreign substances in the earphone terminals. - Check that the earphones are connected properly. (When listening to FM radio, earphones serve as antenna.) - Adjust the position of the player and earphones. - Turn off any nearby electronic equipment to avoid potential interference. + There is no sound or there is too much noise. - Check that the volume is set to ‘0’.
None of the companies, organizations, products, people, or events cited in the examples is real. Our company has no intention to imply a relationship with any company, organization, product, person or event through this manual, and none should be inferred. It is the user’s responsibility to observe the relevant copyright regulations. ©1999~2011 iriver Limited. All rights reserved.
