User manual

Getting Started 08
User Guide
Connecting to Computer
1. Turn on the device and your computer.
2. Connect the device to your computer using USB Type-C
cable and select one of the following settings on the device
[Menu - Settings - USB mode]
Media Device (USB Drive): Transfer files from a computer
to the device.
DAC Input: Listen to music on a connected computer
through the device. (See Page 36.)
Connecting S/PDIF OUT
At S/PDIF OUT, the DSD format is converted to PCM and played back.
PCM can select output bit rate (16/24bit) and sample rate
(48/96/192kHz).
The volume will be fixed at the maximum level.
The output format of connected external devices may differ so refer
to the specifications of each device.
1. Listen to music through an external device by connecting the
S/PDIF-IN-compatible external device using the optical cable
and operating the product. Turn on the output format conversion
function in [Menu-Settings-S/PDIF Conversion], to convert to the
format that is set when S/PDIF connection is made and output.