User manual

Using the Device 35
User Guide
Playback is unavailable when settings exceed the supported
formats. Volume control is unavailable when the LCD screen is
turned off when using the USB DAC connection.
The Previous, Play, and Next buttons are unavailable when
connected as a USB DAC.
Playback may stutter when computer performance is slow or the
USB connection is experiencing heavy usage.
There may be issues with audio-to-video synchronization during
video playback depending on the sound quality and operating
environment.
S/PDIF (OPTICAL) is unavailable during USB DAC connection.
Volume cannot be adjusted via the Windows volume control. The
volume wheel on the device or volume control on the appropriate
program must be used to adjust the volume.
Install a dedicated driver to use the SP1000 as a USB DAC.
The driver file is located in SP1000\Internal_Storage\SP1000_
Contents\Driver. Before installing the driver, set SP1000 to USB
DAC mode and connect to PC.
USB DAC
Installation
The USB DAC function allows the SP1000 to be recognized
as a sound card on a computer. Music from the computer is
played through the device’s headphone port for an enhanced
listening experience.
USB DAC Specifications
Supported OS
Windows XP(32bit) / Windows 7(32bit/64bit) /
Windows 8(32bit/64bit) / Windows 10(32/64bit)
MAC OS 10.7
USB DAC Support Specifications
Supported Formats: PCM [8~384kHz(8/16/24/32bit)]
DSD [2.8/5.6/11.2MHz]
Control the volume with the SP1000’s volume wheel.