User manual

Getting Started 07
User Guide
Connec-
tions
3.5mm Unbalanced Port
1. Connect earphones or headphones to the 3.5mm unbalanced
port.
1. Connect earphones and headphones to the 2.5mm balanced
port.
OR
OR
Earphone and Headphone Ports
3.5mm Unbalanced Line-out
Line-out Port
2.5mm Balanced Port
1. Connect devices with line-in support.
06 Getting Started
User Guide
1. Connecting to computer via USB Type-C cable will also
charge the device.
Charging Time: Maximum 12 hours (fully drained, Power-off)
Computer may need to be turned on to start charging depending on
computer specifications.
When charging via computer connection, the charging time may
vary depending on whether the device is turned on or off.
If a computer goes into standby/sleep mode, the device may not be
charged depending on computer specifications.
The built-in battery will gradually lose capacity over time according
to the number of charges/discharges.
Do not use cables other than USB Type-C cable. Using other cables
may cause malfunctions.
Charging Time: Fast charging: Maximum 4 hours (Completely run-
down, Power-off, 9V 1.67A adapter) / Normal charging: Maximum 5
hours (Completely run-down, Power-off, 5V 2A adapter)
A fast charger of 9V 1.67A may be used. Using a 12V adapter will not
charge the device and may cause malfunctions.
Charging via Computer Connection
1. Commercially available 5V 2A / 9V 1.67A adapters may be
used for charging.
Charging via USB Wall Adapter
Charging