User manual

User Guide
Getting Started 06
The AES3 function is only supported on the left-side Mini
XLR input.
A professional condenser microphone can be used with the
AK Record via the Mini-XLR-to-XLR conversion cable.
After setting the MIC1 / LINE2 / AES3 or MIC2 / LINE2
selection key to the desired position, you must select the
matching input port from the INPUT menu of the main
screen. We recommend selecting LINE2 when recording via
MIC1 at the bottom of the device and MIC2 when recording
via LINE1.
Be sure to identify the exact power specifications of a
microphone before using the phantom power setting. Using
the phantom power setting with an unsupported microphone
may cause damage to the microphone.
To u s e a m i c ro p ho n e t h a t r e qu ir es p ha n to m p ow er, y o u m u st
enable [Phantom Power] under Settings. The microphone
will not function if the setting is disabled.
MIC1 / LINE1 / AES3 Selection Key: Select the desired
function via the selection key.
Micro-USB Charging Port: Charge the AK Recorder
using a Micro-USB cable.
Bolt: Connect and secure a compatible AK media player
to the AK Recorder with the bolt provided.
MIC2 / LINE2 Input: A non-powered (passive) dynamic
microphone as well as a powered (active) condenser
microphone can be connected, and other external devices
can be connected via LINE-IN for recording.
MIC2 / LINE2 Selection Key: Select the desired function
via the selection key.
Phantom Power Selection Key: It can select the power
level of a microphone connected to the Mini XLR Input Port.
Microphone Stand Mounting Hole:
Secure the microphone stand to the mounting hole.