User manual

Using the Device 13
User Guide
Turntable - Phono AMP - RCA Y cable - AK Recorder (LINE2 input)
AK Recorder
(LINE2 Input)
Phono Amp
RCA Y-Cable
Turntable
[LINE2] Record audio from an external source connected via
a 3.5 mm cable (sold separately). As shown below, the AK
Recorder can connect to and record directly from an external
source such as a turntable connected to a phono amplifier
with analog output using an RCA Y-cable (sold separately).
More: Set additional recording options.
Monitoring: Enable or disable the
monitoring function. When enabled,
sound can be heard in real-time before
recording. “READY” will be displayed
on the screen after approximately
2 to 3 seconds of stand-by time.
Pre-Recording: Enable the pre-
recording function, and set the
time as 2, 3, 5, or 10 seconds.
You may only use the pre-recording
function after enabling monitoring.
REC Storage: Set the storage
location for recorded files. You may
select internal storage or SD card.
Limiter: Enable or disable the limiter
function, and set the maximum
dBFS value, slope, and time. The
limiter function corrects distorted
signals and prevents clipping when
excessive input levels are detected.
The limiter’s base threshold value can be set from 0 to -10dBF,
and the compression ratio (slope value) can be set from 1:2
to 1:20. A ratio of 1:20 is the limiter’s maximum slope value.