User manual

Getting Started 06
Connecting the product while wearing earphones/
headphones may seriously damage your hearing.
Make sure to turn the product’s power OFF before
connecting the source device and earphones/headphones.
Make sure to check the volume first before
wearing earphones/headphones.
Make sure that the input and output devices are
securely connected to the correct ports.
Input Max. Level: Unbal. 2Vrms / Bal. 4Vrms
When powered on, music is played after booting
(blinking white LED), so please turn up the volume
after the white LED stops blinking. Simultaneous-
ly increasing the volume as soon as the power is
turned on may cause serious hearing damage.
The power turns off automatically when the
product remains in an non-operational state
(cable disconnected) for a certain period. Turn the
product off and on to resume operation.
Turn the product's wheel key clockwise until it clicks to
turn the power ON.
When powered on, the status LED turns on after booting
(blinking white LED). The status indicator LED shows the
current battery status.
※ 100~70% - White | 70~30% - Yellow | 30~1% - Red
Turning the wheel key all the way counterclockwise until
you hear a click turns the LED and power OFF.
Powering the Device On/Off
05 Getting Started
Source Device
AUX cable
3.5 to 3.5 / 4.4 to 4.4
OR
AK PA10
IN OUT
Connections
Connect the output port of the source device and the input
port of the AK PA10 with an AUX cable (4.4 to 4.4 / 3.5 to 3.5).
※ The 4.4 mm AUX cable is not included in the product.
A 4.4 mm AUX cable must be purchased separately to
use 4.4 mm earphones/headphones.
Connect earphones or headphones to the output port (OUT)
of the AK PA10 to which the source device is connected.
Output is possible only with earphones or headphones
that have the same specifications as the input port.
※
When input through the [4.4 mm Balanced Audio Input] port,
output only through the [4.4 mm Balanced Phone Out] port
※ When input through the [3.5 mm Unbalanced Audio Input] port,
output only through the [3.5 mm Unbalanced Phone Out] port