Installation Instructions

Step 3: Install Components

New Installation: Existing Installation:

Outlet tee assembly is not glued. Outlet tee is glued.

Note: Pump tank to below water line

to avoid solids going into draineld.

Remove tee assembly and discard. Use a PVC saw to remove the tee and discard

Glue; coupling, pipe stub, lter assembly and lter cartridge onto the outlet pipe.

Filter

Cartridge

3 4

Filter

Assembly

Pipe Stubs

Coupling

12-11-081 Menards Training Manual.1-7-13.indd 18 1/9/2013 11:24:58 AM