Owner`s manual

AJP PR5 User’s manual – 3
rd
Edition – Rev 1 Page
9
have a harder response. Turn counter
clockwise to have a softer response.
To adjust rebound turn the screw (2) on
the right leg clockwise to have a harder
response. Turn counter clockwise to
have a softer response.
Screw (3) placed on the lower end of
the legs of 40mm Marzocchi has no
adjusting function; it should only be
removed for front fork disassembly.
Rear suspension adjustment
PR5 is equipped with a fully adjustable
shock absorber, except Trail version.
To adjust pre-charge loose first the
upper nut (1), then turn adjusting nut (2)
clockwise for more pre-charge or
counter clockwise for less pre-charge.
To adjust rebound, turn the screw
placed on the bottom of the shock
absorber (3) clockwise for more
rebound or counter clockwise for less
rebound.
To adjust fast compression damping,
turn the knob (4) clockwise for more
rebound speed. To reduce rebound
speed turn counter clockwise.
To adjust low compression damping,
turn the screw (5) clockwise for more
rebound speed. To reduce rebound
speed turn counter clockwise.
Standard set-up:
- Spring length: Enduro 205mm;
Supermoto 210mm
- Fast compression: turn all to close
position (+) and then turn 12 clicks
to open (-)
1
2
4
5
3
3
1
2