User Manual
Installation process:
Do not connect more than 3 kW load to WallSwitch. When connecting the load, strictly
observe the connection diagram since an incorrect connection may cause the device to
malfunction and/or damage the property.
When installing WallSwitch in the box, lead out the antenna and place it under the
plastic frame of the socket. The bigger the distance between the antenna and
1. De-energize the cable to which WallSwitch will be connected.
2. Connect the grid wire to the WallSwitch terminals according to the following
scheme:
3. Connect a socket using bundled connecting wires or an electrical appliance
using a wire with the sucient cross-section to WallSwitch. It’s recommended
to use wires with a cross-section of 1.5 – 2 mm².