User Manual

Indication
The WallSwitch light indicator can light green depending on the device status.
When not paired with the hub, the light indicator blinks periodically. When the
functional button is pressed, the light indicator lights up.
Functionality testing
The Ajax security system allows conducting tests for checking the functionality of
connected devices.
The tests do not start immediately but within a period of 36 seconds when using
default settings. The test time start depends on the settings of the detector ping
interval (the Jeweller menu in the hub settings).
Installation of the Device
Regardless of the type of electrical circuit, only a quali�ed electrician should install
WallSwitch!
WallSwitch is designed for installation inside a socket box with the diameter 50
mm and more and the depth no less than 70 mm. The relay can also be installed
within extension cords and other circuits powered by 230 V.
Jeweller Signal Strength Test