User Manual

Parameter Value
Jeweller Signal Strength Signal strength between hub and device
Connection Connection status between hub and device
Routed Through ReX
Displays the status of using a
Active State of the relay (switched on/off)
Voltage The input voltage of WallSwitch
Current The input current of WallSwitch
Power Current consumption in W
Electric energy consumed
The electric power consumed by the device
connected to the relay. The counter is reset when
the relay loses the power supply
Temporary deactivation
Displays the status of the device: active or
completely disabled by the user
Firmware Device �rmware version
Device ID Device identi�er
Settings
Setting Value
First �eld Device name, can be edited
Selecting the virtual room to which the device is
radio signal
range extender
1. Devices
2. WallSwitch
3. Settings