User Manual

For detection and pairing to occur, the device should be located in the coverage area of the
hub’s wireless network (at the same object). The connection request is transmitted only at
the moment of switching on the device.
If the device failed to pair, wait 30 seconds and then retry. WallSwitch will appear in
the list of hub devices.
The device statuses update depends on the ping interval set in the hub settings.
The default value is 36 seconds.
When switching on for the �rst time, WallSwitch contacts are open! When deleting
WallSwitch from the system, contacts open!
States
3. Click Add — the countdown will begin.
4. Press the functional button. If you can’t do this (the device is mounted in the
wall), give WallSwitch at least 20 W load for ve seconds (by connecting and
disconnecting a working kettle or lamp).