User Manual
User Guide Opens the detector User Guide
Unpair Device
Disconnects the detector from the hub and
deletes its settings
Indication
Event Indication Note
Turning on the detector
Lights up green for about one
second
Detector connection to the
, and
Lights up continuously for a
few seconds
Alarm / tamper activation
Lights up green for about one
second
Alarm is sent once in 5
seconds
Battery needs replacing
During the alarm, slowly lights
up green and goes off
Replacement of the detector
battery is described in the
manual
Detector Testing
The Ajax security system allows conducting tests for checking the functionality
of connected devices.
The tests do not start straight away but within a period of 36 seconds when
using the standard settings. The time of the start depends on the settings of the
detector polling period (the paragraph on “Jeweller” settings in the hub
settings).
Deactivate lid notications — the system will
ignore only notications about the triggering of
the device tamper button
Learn more about temporary
deactivation of devices
hub ocBridge Plus
uartBridge
Battery Replacement
Jeweller Signal Strength Test