User Manual

extender
Motion Detector Sensitivity Sensitivity level of the motion detector
Motion Detector Always Active
If active, the motion detector is always in the
armed mode
Glass Protection Sensitivity Sensitivity level of the glass detector
Glass Protection Always Active
If active, the glass detector is always in the
armed mode
Temporary Deactivation
Shows the status of the device: active,
completely disabled by the user, or only
notications about triggering of the device
tamper button are disabled
Firmware Detector rmware version
Device ID Device identier
Setting Up the Detector
Setting Value
First eld Detector name, can be edited
Room
Selecting the virtual room to which the device is
assigned
Delay when entering, sec Selecting delay time when entering
Delay when leaving, sec Selecting delay time on exit
Delays in night mode Delay turned on when using night mode
Arm in night mode
When turned on, the detector will switch to
armed mode when using night mode
Alarm LED indication Allows you to disable the ashing of the LED
indicator during an alarm. Available for devices
with rmware version 5.55.0.0 or higher
1. Devices
2. CombiProtect
3. Settings
How to nd the rmware version or
the ID of the detector or device?