User Manual
Detector Maintenance
Check the operational capability of the CombiProtect detector on a regular
basis.
Clean the detector body from dust, spider web and other contaminations as they
appear. Use soft dry napkin suitable for equipment maintenance.
Do not use for cleaning the detector any substances containing alcohol,
acetone, gasoline and other active solvents. Wipe the lens very carefully and
gently – any scratches on the plastic may cause reduction of the detector
sensitivity.
The pre-installed battery r ensures up to 5 years of autonomous operation (with
the inquiry frequency by the hub of 3 minutes). If the detector battery is
discharged, the security system will send respective notices and the LED will
smoothly light up and go out, if the detector detects any motion or if the tamper
is actuated.
To change the battery, switch off the device, loosen three screws and remove
the front panel of the detector. Change the battery for a new one of type
CR123A, observing the polarity.
2. in the direction of the window, when the detector lens is exposed to direct
sunlight;
3. opposite any object with the rapidly changing temperature (e.g., electrical
and gas heaters);
4. opposite any moving objects with the temperature close to that of the
human body (oscillating curtains above the radiator);
5. opposite any reective surfaces (mirrors);
6. at any places with fast air circulation (air fans, open windows or doors);
7. nearby any metal objects or mirrors causing attenuation and screening of
the signal;
8. within any premises with the temperature and humidity beyond the range of
permissible limits;
9. closer than 1 m from the hub.