Instruction manual

78
Device Control Preset—select the AJA Video KONA 3 device (NTSC or PAL as
desired). This tells Final Cut that the KONA 3 will control the VTR attached
to KONA 3.
A/V Devices (Audio and Video Playback)—select the KONA 3 as video and audio
playback devices for Final Cut and the format to be output.
Audio/Video Settings, Summary Window
To Create A New Easy Setup
If you have a group of presets that you’d like to use continually, then you can create
a new Easy Setup by modifying the settings of Easy Setup currently selected (pick
one most like the one you want to create) and then saving it under a new name:
1. Change the currently selected Easy Setup by making changes at the Summary
tabbed window via the pulldown menus.
2. When everything is set as desired, click on the Create Easy Setup button at the
bottom of the Summary window.
3. A new dialog will pop up. Enter a descriptive name for the new Easy Setup
(i.e., 10-bit SDI from Video Server) in the Name field.
4. Enter a sentence or two describing what is unique about the Easy Setup in the
Description field.
5. Click the Create button to store the new Easy Setup.