Instruction manual

1
77
KONA 3 Installation and Operation Manual — Easy Setups for Typical Uses
Audio/Video
Settings Menu
The Audio/Video Settings menu in Final Cut Pro contains a series of tabbed windows
where you define the presets in specific categories such as A/V devices or in what
format media is captured. When you open the Audio/Video Settings window, it shows
a summary of the currently selected Easy Setup. Other tabbed windows are available
with greater details about each category. On the initial summary window you can see
the selected presets for the Easy Setup as well as change specific presets.
The presets you can change on the Summary window are:
Sequence Preset—select one of these as the editing timebase for new sequences. If
you make a change to Sequence Presets, the change will only take effect on any
new sequences you create—currently active sequences will not see the change.
Capture Preset—select one of these to set the incoming source format you’ll be
capturing. Ideally select the maximum quality format you’ll be using for most of
the material so there will be no need to re-render later as clips are added from the
bin to the sequence.
AJA KONA 3- 1080i 29.97 DVCPRO HD Use this preset when working with high-definition 1080i at a 29.97
framerate. Material will be processed as DVCPRO HD.
AJA KONA 3- 1080i 30 8 bit uncompressed Use this preset when working with high-definition 1080i at a 30
framerate. Material will be processed as 8 bit uncompressed.
AJA KONA 3- 1080i 30 10 bit uncompressed Use this preset when working with high-definition 1080i at a 30
framerate. Material will be processed as 10 bit uncompressed.
AJA KONA 3- 1080i 30 DVCPRO HD Use this preset when working with high-definition 1080i at a 30
framerate. Material will be processed as DVCPRO HD.
AJA KONA 3- 1080psf 23.98 8 bit uncompressed Use this preset when working with high-definition 1080psf at a 23.98
framerate. Material will be processed as 8 bit uncompressed.
AJA KONA 3- 1080psf 23.98 10 bit uncompressed Use this preset when working with high-definition 1080psf at a 23.98
framerate. Material will be processed as 10 bit uncompressed.
AJA KONA 3- 1080psf 23.98 DVCPRO HD Use this preset when working with high-definition 1080psf at a 23.98
framerate. Material will be processed as DVCPRO HD.
AJA KONA 3- 1080psf 23.98 DL 10 Bit
Uncompressed Log RGB
Use this preset when working with high-definition dual link input (both
SDI inputs being fed a dual link source) at 1080psf with a 23.98
framerate. Material will be processed as 10-bit uncompressed 4:4:4 log
RGB.
AJA KONA 3- 1080psf 23.98 DL 10 Bit
Uncompressed RGB
Use this preset when working with high-definition dual link input at
1080psf with a 23.98 framerate. Material will be processed as 10-bit
uncompressed 4:4:4 RGB.
AJA KONA 3- 1080psf 24 8 bit uncompressed Use this preset when working with high-definition 1080psf at a 24
framerate. Material will be processed as 8 bit uncompressed.
AJA KONA 3- 1080psf 24 10 bit uncompressed Use this preset when working with high-definition 1080psf at a 24
framerate. Material will be processed as 10 bit uncompressed.
AJA KONA 3- 1080psf 24 DVCPRO HD Use this preset when working with high-definition 1080psf at a 24
framerate. Material will be processed as DVCPRO HD.
AJA KONA 3- 1080psf 24 DL 10 Bit Uncompressed
Log RGB
Use this preset when working with high-definition dual link input (both
SDI inputs being fed a dual link source) at 1080psf with a 24 framerate.
Material will be processed as 10-bit uncompressed 4:4:4 log RGB.
AJA KONA 3- 1080psf 24 DL 10 Bit Uncompressed
RGB
Use this preset when working with high-definition dual link input at
1080psf with a 24 framerate. Material will be processed as 10-bit
uncompressed 4:4:4 RGB.
AJA KONA 3- 2K x 1556 psf 23.98 10 Bit
Uncompressed Log RGB
Use this preset when working with high-definition 2K frame Log RGB
input via HSDL. Material will be processed as 10-bit uncompressed.
AJA KONA 3- 2K x 1556 psf 23.98 10 Bit
Uncompressed RGB
Use this preset when working with high-definition 2K frame RGB input
via HSDL. Material will be processed as 10-bit uncompressed.
Easy Setup (as listed in FCP Pulldown) Description/Usage