Instruction manual

1
75
KONA 3 Installation and Operation Manual — Easy Setups for Typical Uses
Easy Setup Dialog
At the top of the Easy Setup dialog is the currently selected Easy Setup. It can be
changed by clicking on the pulldown arrow at the right. Doing so results in a long list
of the factory Easy Setups stored on the system. If you wish to see all of the Easy
Setups, factory and user-defined, then ensure the “Show All” checkbox is marked at
the right side of the dialog. By default, all AJA Easy Setups will be checked.
Factory Easy Setups
To choose a new Easy Setup from the list, click on the pulldown menu and select a
desired choice. The choice won’t take effect until you click the Setup button, but you
will be able to see the description for the choice just by selecting it (without clicking
the Setup button). Descriptions provide a paragraph summarizing what the Easy
Setup is intended for and then each of the presets are explained (Sequence, Capture,
Device, Playback Output, and Edit to Tape Video/Audio Outputs).
A large set
of Easy
Setups are
Provided
as KONA 3
defaults