Instruction manual

68
Here’s another 2K crop, this time showing cropped output to a 2K projector:
KONA 3 Control Panel, 2K Crop Tab, Showing a 2K Crop to 2K Projector
In the Format Tab window, this corresponds to:
Once a crop is selected, KONA 3 defaults to the crop being placed in the center area
of the 2K frame. You can change or move the cropped area from within the frame by
selecting the green rectangle with the mouse cursor and dragging it to a desired spot.
Tip:
Using the Command key held down in conjunction with the mouse cursor
within the Control Panel 2K Crop screen—while in another application (i.e., Final
Cut)—allows that application to retain control of the KONA output while adjusting
the crop. This is highly useful for visualizing the changes you’re making.
Or, you can also use the arrow buttons at the right of the screen to move the crop
area up, down or sideways. The square button in the center returns the crop area to
the center of the screen. Alternatively, you can also enter a specific X and/or Y pixel
offset by typing a number into the text fields above the arrow buttons.