Instruction manual

1
61
KONA 3 Installation and Operation Manual — Using The KONA 3 Control
Setup Tab Screen KONA 3 provides a high-quality analog component or composite output, generally
used for monitoring. This screen shows the current settings for that analog output,
and allows you to re-configure it when desired.
KONA 3 Control Panel, Setup Tab
Setup Tab Screen Settings
Analog Black Level—choices in the black Level pulldown menu are only available for
the two Composite analog formats. Choices presented are for US or Japan:
7.5 IRE (NTSC US)
0 IRE (NTSC Japan)
Analog Audio Monitor Level Audio—when a Breakout Box is connected to KONA
3, the button selected determines the audio level that will appear at the Analog
Audio Output RCA connector pair (“FSD” is full-scale-deflection reading as
measured on a VU meter). Select +18 for Europe or +24 for USA.
Lock Input Audio Gain To Unity—when set, the KONA card will ignore the Final
Cut Pro gain setting and set the audio gain at unity. Not setting this checkbox
tells the KONA card to get the audio gain setting from Final Cut Pro.