Instruction manual

Analog Out Tab

Screen

KONA 3 provides a high-quality analog component or composite + Y/C output,

generally used for monitoring. This screen shows the current settings for that analog

output, and allows you to re-conﬁgure it when desired (format and black-level).

KONA 3 Control Panel, Analog Out Tab

Analog Out Tab Screen Settings

Analog Output Format—choices in the Analog Format pulldown menu vary

depending upon the Analog Output video standard. For example, the

“Composite + Y/C” selection is only available when an SD (525i29.97 or

625i25) format is in use. Analog formats can include:

Composite +Y/C (one composite output and a simultaneous Y/C (S-Video)

output)

Component (SMPTE/EBU N10)

Component (Beta)

Component (RGB)

Component (RGB -HV)

Monitor Audio—here you can select which two channels will be mapped to the

analog audio output (K3-Box only).