Instruction manual

1
47
KONA 3 Installation and Operation Manual — Using The KONA 3 Control
KONA 3 Formats include:
525i 23.98
525i 29.97
625i 25
720p 23.98
720p50
720p 59.94
720p 60
1080i 25
1080i 29.97
1080i 30
1080sf 23.98
1080sf 24
1080p23.98
1080p24
1080p25
1080p29.97
1080p30
1080p50
1080p59.94
1080p60
2K1080p23.98
2K1080p24
2K1080sf23.98
2K1080sf24
2K1556sf14.98
2K1556sf15
2K1556sf23.98
2K1556sf24
Note: The AJA Control Panel software uses the abbreviation "sf" instead of “psf ”
when referring to “progressive segmented frame” formats. In the manual and in other
literature you may see either of these acronyms used interchangeably. Visually it is
easier to discern at a glance if you are working with progressively segmented frame
formats (sf in the Kona Control Panel) as compared to progressive frame formats
which will show only “p.”
Crossconversion: if you have an HD format as your primary and then select a
secondary HD format with a different frame size, the KONA 3 card will perform
a crossconversion where necessary (input or output) for “like Hz” formats. By like
Hz this means that 720P 59.94 may be converted to 1080i 29.97 (59.94Hz).
Converting from disparate Hz is not supported on the KONA 3 card for
crossconversions. The example below shows 1080i to 720p.