Instruction manual

30
Card Slots, PCIe G5 shown here
Note: After you install the KONA 3 card, you may notice that in the MacOSX
Network preferences there is a message stating “You have a new network port
named KONA 3 —be sure to check the settings...”. There is no need to take any
action; this occurs because MacOSX detects the RS-422 serial port on the
KONA 3 card that you will use for VTR machine control.
Cabling the System
System Video/
Audio Cable
Connections
When installing your system, you’ll make video and audio input/output
connections. These connectors are explained individually in chapter 2. Here, system
interconnection is shown and described.
PCI-Express Slots
Slot 4 is the preferred slot on a PCIe G5 for KONA 3 PCIe card installation
Slot 3 is the preferred slot on a MacPro for KONA 3 PCIe card installation
Top Slot is preferred in PCI-X G5s (133Mhz slot) for KONA 3X PCI-X card installation