Instruction manual
2
KONA LS/LSe work with Final Cut Pro and other applications to provide a
professional editing suite, corporate/industrial video center, or high-powered
desktop video setup.
This manual covers the installation and operation of both the KONA LSe and LS
and discuss using them with Final Cut Pro and other applications. Instructions for
installing the KL-Box are shipped separately with it.
Features
The KONA LS card offers a large number of unique features for optimum quality,
ease of use, and support for a wide variety of workflows and environments.
Hardware
•
12 bit accuracy Component/Composite/S-video analog I/O
•
SDI input, two SDI outputs
•
AES I/O; sample rate conversion on input (2 Channels, XLRs)
•
Balanced analog audio I/O (2 Channel XLR)
•
6-Channel SDI embedded audio support
•
Genlock
•
RS-422 Control Port (Sony), 9-pin D, for machine control
•
64 bit, 66MHz universal PCI card
•
Breakout cable
•
Optional KL-box Breakout Box—Provides Rack mounting and Flexible Easy
I/O (2 KL-box cables are included with the KL-box)
•
Available for PCIe G5s as KONA LSe
•
Available for PCI G4 and G5 as KONA LS
KONA LS Audio
KONA LS supports 2-channel 24-bit 48kHz AES audio via XLR connections,
and 6 channel embedded 24 bit 48kHz audio over the same single SDI
connection as the video. If you are using a digital VTR—you’ll have the proper
connections.
For analog audio, KONA LS provides two-channel balanced audio input and
output. If you purchase the optional KL-Box breakout box, you also get two-
channel unbalanced audio output (RCA jacks).