Instruction manual

50
Easy Setup Dialog
At the top of the Easy Setup dialog is the currently selected Easy Setup. It can be
changed by clicking on the pulldown arrow at the right. Doing so results in a list of
the Apple-supplied Easy Setups stored on the system. If you wish to see all of the
Easy Setups, factory, AJA, and user-defined, then ensure the “Show All” checkbox is
marked at the right side of the dialog.
Factory Easy Setups
To choose a new Easy Setup from the list, click on the pulldown menu and select a
desired choice. The choice won’t take effect until you click the Setup button, but you
will be able to see the description for the choice just by selecting it (without clicking
the Setup button). Descriptions provide a paragraph summarizing what the Easy
Setup is intended for and then each of the presets are explained (Sequence, Capture,
Device, Playback Output, and Edit to Tape Video/Audio Outputs).
Ensure
“Show All” is
checked so
you can see
the AJA Easy
Setups
A large set
of Easy
Setups are
Provided
as KONA
LS defaults