Instruction manual

1
41
KONA LS/LSe Installation and Operation Manual — Using The KONA LS
Formats Screen The Formats screen shows the video format currently in use by the KONA LS
framebuffer (called the Primary Format) and allows you to change it. All throughout
the Control Panel, choices are always presented based on what KONA LS can do with
the signals available and the inputs/outputs selected.
KONA LS Control Panel, Formats Tab, Showing Primary Formats Pulldown Menu
Format Screen Settings
Video Format—This pull-down menu shows the currently selected format. If you
select an alternate value in the Primary Format using the pull-down, it will change
the format used by KONA LS’s framebuffer. When a change is made via the
Video Format pull-down, the block diagram will change to reflect the new
format. KONA LS Formats are: 525i 29.97 or 625i 25