Instruction manual

1
39
KONA LS/LSe Installation and Operation Manual — Using The KONA LS
On the Inputs screen you can view the currently selected video and audio input
sources and map audio sources to the channels supported by Final Cut Pro (more on
this later). Two information panes in the screen are provided: Video Input and Audio
Input. (If an input/output has no video, it will be indicated on the block diagram as
“No Video.”)
KONA LS Control Panel, Inputs Tab, Composite Analog Output Selected
Input Screen Settings
Video Input—These radio buttons allow you to see and change what’s currently
selected and the video format that KONA LS has detected there (if any). In the
example shown previously, it shows that video is selected at the SDI input and the
format is 525 with a frame rate of 29.97. If Analog is selected, then you also need
to select the Analog Format via a pulldown menu. Choices are:
Composite
Y/C
Component (SMPTE/EBU N10)
Component (Beta)