Instruction manual

1
29
KONA LS/LSe Installation and Operation Manual — Installing KONA LS
System software updates may occasionally become available to AJA KONA LS owners
on our website (www.aja.com). We recommend checking occasionally for both
software updates and additional product information.
Note: If your PowerMac has previously had another video capture or multimedia
card installed, ensure you remove the card and uninstall any related software before
installing KONA LS. This will prevent any hardware or software conflicts. KONA LS
will operate properly on a PowerMac that also has an AJA Io installed.
Software
Installation
Procedure
Locate the AJA KONA LS Software CD packaged with your system. Then follow the
procedure below to put the required software on a host system to be used with KONA
LS. The PowerMac system must meet the minimums described in Chapter 1: System
Requirements.
Note: Before installing KONA LS software, turn off any virus protection and
security software that you may have installed on your computer.
1. Insert the KONA LS CD in the Power Mac
2. Locate the KONA LS CD icon on the OS X desktop.
3. Move the mouse cursor to the icon and double click to see the CD contents,
which will appear in its own window.
4. In the window, locate the package file; it has an icon that looks like a box and
has a “.pkg” suffix.
Note: Files ending in the “.mpkg” suffix are OS X installer files. These launch the
OS X installer and tell it where and what to install on your system.
5. Double-click the package to log on and begin software installation.
6. The system will respond by asking you to authenticate who you are as currently
defined on your OS X user profile. Enter the proper name and password at the
Authenticate prompt; if you have multiple users defined, ensure that you log
on as a user with administrator-level authority.
Log On Authenticate Prompt