Instruction manual

28
KONA LSe, this will be on breakout cable or KL-Box; on the KONA LS, it’s
on the circuit card endplate.)
4. Connect two SDI cables between KONA LS and your digital VTR (Digital
Betacam etc.): one from KONA LS SDI In to the VTR SDI Out, and one
from KONA LS SDI Out (1 or 2) to the VTR SDI In. The KONA LS SDI
connections have embedded audio so the VTR must be configured
accordingly. (On the LSe, the SDI connectors are on the card’s endplate; on
the LS they are provided on the breakout cable.)
5. If you have an AES/EBU-ready audio monitoring system, then connect the
two channels of AES/EBU output from KONA LS’s XLR connectors
(channels 1 and 2) to the monitoring system AES/EBU inputs. If you instead
have an analog audio monitoring system, you can use either the XLR
balanced audio connectors or the two RCA-style unbalanced stereo output
jacks on the Optional KL-box for output.
Typical System Connections—Shown with Optional KL-Box
Installing KONA LS Software
First ensure that Final Cut Pro is installed as detailed in its user documentation.
Final Cut Pro must be installed and have been run at least once prior to installing AJA
KONA LS software. Next, use the CD-ROM supplied with the KONA LS system to
install necessary software drivers and KONA LS control panel. You cannot use
KONA LS with Final Cut Pro until the AJA KONA LS software has been installed
on the host Power Mac.
Digital VTR with SDI Inputs
RS422
Machine
Control
SDI Video
with Embedded
Audio In/Out
External Reference
Audio Monitor
AES/EBU Audio In/Out
to Monitor System
Reference Monitors
Analog Audio
Inputs/Outputs
(Balanced)
POWER
CMPTR
Apple Xserve RAID
Computer Monitor
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Optional
Genlock
Reference
Dual-port 2Gb Apple Fibre Channel card
LSe: PCIe G5
LS: PCI G4 or G5
Video Monitor
Component
Video
Apple PowerMac
w/OSX
And
Final Cut
Pro HD
AJA KONA LSe
or LS Card
Connect to
KL-Box Using
Cables and Instructions
Supplied With it
Installed
Inside
PowerMac