Instruction manual

1
11
KONA LS/LSe Installation and Operation Manual — Cable Connections
Using KL-box The KL-box attaches to the KONA LSe or LS card via cables that attach to the back of
the KL-box. These cables and installation instructions are supplied with the KL-Box.
Note: The LSe and LS use different cables to attach to the KL-Box; ensure you have
ordered the correct KL-Box for your model.
AJA KL-Box Panel Connectors
About BNC
Connectors
Although most video professionals are used to BNC connectors, you may not have
seen them if you’ve been using primarily desktop video equipment. BNC connectors
ensure a positive connection by the act of locking the connectors together via pins in
one connector that fit into slots in the corresponding connector.
To make a BNC connection, slide the cable connector over the panel connector and
then when seated, rotate the barrel of the cable connector 90˚ clockwise until the
connectors are locked together. When properly locked, the cable cannot accidentally
be pulled out.
Connector
Descriptions—
Cables and KL-
box
Connectors on the standard cable set are labelled as to their function for easy
installation and maintenance. Similarly, connectors on the optional KL-box are also
labelled.
RS422
Machine
Control
External
Reference
(loop)
Analog Audio
Output
Balanced Audio In
Channels 1 & 2
Balanced Audio Out
Channels 1 & 2
Composite/
Component
Video In
Composite/
Component
Video Out
AES/EBU Audio
In and Out
In
Serial
Digital
Out
Serial
Digital
Pins (2) on BNC Connector
Align slots in
cable connector
barrel with connector
pins, then slide it over the pins
and rotate the barrel
to lock the connectors
(connector on KL-box)
together