Instruction manual

1
35
KONA 3G Installation & Operating Guide — Updating KONA 3G Firmware
Updating KONA 3G Firmware
When you update your KONA 3G software by downloading new versions from the aja.com
website, it is possible that some versions may also require a firmware update to update the
software stored in non-volatile memory on the board. Always carefully read the release notes
that accompany each version to be installed. The release notes will spell out all required
software and hardware necessary to ensure a successful update of your KONA 3G.
Follow these instructions when a firmware update is required:
1. First install the new version of KONA 3G software.
2. After successfully installing the new KONA software, the AJA KONA Updater will
automatically launch. (The updater application is located in the AJA Utilities folder.)
3. When the updater starts, the following screen will display indicating the current firmware
and update firmware creation date.
Firmware Update Welcome Screen
4. Click Update Firmware to begin the update process. Do not interrupt the update process
Firmware Update Warning Screen