Instruction manual

• 2K HSDL (High Speed Data Link) 4:4:4, (2 x BNC)

• 4K/QuadHD 4:4:4 (4 x BNC)

• HDMI v1.4, 30/36 bits/pixel, RGB or YUV, 2.25Gbps, SD, HD, 1080p-50/60

Video Output Analog:

• Composite/S-Video (Y/C) (1 x BNC/2x BNC+adapter)

• NTSC, NTSCJ, PAL

• 12-bit D/A, 8x oversampling

• +/- .2 dB to 5.0 MHz Y Frequency Response

• +/- .2 dB to 1 MHz C Frequency Response

• .5% 2T pulse response

• <1% Diff Phase

• <1% Diff Gain

• Component (3 x BNC)

• HD: YPbPr, RGB

• SD: YPbPr, RGB (component mode)

• SMPTE/EBU N10, Betacam 525 line, Betacam 525J, RGB

• 12-bit D/A, 8x oversampling

• +/- .2 dB to 5.5 MHz Y Frequency Response

• +/- .2 dB to 2.5 MHz C Frequency Response

• .5% 2T pulse response

• <1 ns Y/C delay inequity

Downstream Keyer:

Supports graphics with alpha channel over video, matte or framebuffer, or framebuffer

content over incoming video or matte.

Audio Input Digital

• 16-channel, 24-bit SMPTE-259 SDI embedded audio, 48kHz sample rate, Synchronous

• 8-channel, 24-bit AES/EBU audio, 48kHz sample rate, Synchronous or Non-

synchronous, Internal sample rate conversion (via 4 x BNC on breakout cable)

• 16-channel, 16- or 24-bit AES/EBU audio, 48 sample rate, Synchronous (via 8 x BNC on

optional K3G-Box)

Audio Output Digital

• 16-channel, 24-bit SMPTE-259 SDI embedded audio, 48kHz sample rate, Synchronous

• 8-channel, 24-bit HDMI embedded audio, 48kHz sample rate, Synchronous

• 8-channel, 24-bit AES/EBU audio, 48kHz sample rate, Synchronous or Non-

synchronous, Internal sample rate conversion (via 4 x BNC on breakout cable)

• 16-channel, 16- or 24-bit AES/EBU audio, 48 sample rate, Synchronous (via 8 x BNC on

optional K3G-Box)