Instruction manual

1
25
KONA 3G Installation and Operation Guide — Installing KONA 3G Software
Installing KONA 3G Software
First ensure that your capture/editing application is installed as detailed in its user
documentation. You cannot use KONA 3G with Third-party software until the application has
been installed and run at least once on your workstation. Next, install the KONA 3G driver
package. After installing KONA drivers you will install your selected AJA third-party plugins
integrating KONA functionality into your capture/editing application.
System software updates may occasionally become available to AJA KONA owners on our
website at:
http://www.aja.com/en/support/kona/mac/kona-3g/.
We recommend checking occasionally for both software updates and additional product
information.
Note: If your computer has previously had another video capture or multimedia card installed,
ensure you remove the card and uninstall any related software before installing KONA 3G.
This will prevent any hardware or software conflicts. KONA 3G will operate properly on a
computer that also has an AJA Io product and its associated drivers installed.
Installing KONA
Software for Mac
After securing the most recent KONA 3G driver package, read the details and requirements on
the to ensure compatibility with your system configuration. Minimum system requirements for
the host were described in “System Requirements” on page 8.
Mountain Lion OS and Gatekeeper
Note: Before installing KONA 3G software, turn off any virus protection and security software
that you may have installed on your computer. Also, with the addition of Gatekeeper
functionality in Mas OS Mountain Lion, you should go to System Preferences>Security &
Privacy and choose to allow Mac App Store and identified developers.
Mac Security & Privacy Gatekeeper Setting