Instruction manual

KONA 3G Installation and Operation Manual — Standard Mode Control

2K Crop Tab Screen This Tabbed screen allows you to determine how 2K frames captured with VTR Exchange and

brought into Final Cut will be cropped. You can select a crop mode and then pan and scan

around to choose the area that will be displayed. This can be done dynamically with a mouse or

by entering explicit numbers

AJA Control Panel, 2K Crop Tab, 2K Crop to 1080PsF from Film Raster

Select a crop mode by choosing 1920 x 1080 or 2048 x 1080 from the pulldown menu; choosing

“Off” turns off 2K frame cropping.

In the Format Tab window, this corresponds to:

Select crop mode

Explicitly specify

an X and/or Y Offset

for the crop

via pulldown

Select a crop area

by moving the rectangle

using these navigation

buttons (arrows).

Square button at center

is used to re-center the crop.

Moving the mouse

cursor while holding

the mouse button

down moves the

crop rectangle within

the 2K frame

One way to move

the crop area:

Two other ways to move the

crop area: