Instruction manual

70
HDMI Output
Tab Screen
The KONA 3G’s HDMI output is shown and configured at this tab screen.
AJA KONA 3G HDMI, HDMI Tab
HDMI Output—One set of radio buttons allow you to select either the primary video format
(framebuffer) or a secondary one (up/down/cross-conversion). Pulldowns are provided for
configuring the video output range, color space and number of embedded audio channels (2
or 8) for the HDMI output. A Protocol pulldown allows you to choose either “HDMI” or “DVI”
protocol—use DVI if you’re outputting to a DVI monitor using an HDMI to DVI adapter.
Stereo 3D—The pulldown menu for 3D output allows you to select either Side-by-Side or
Top-Bottom (Stacked) output of left-eye and right-eye signals.
Note: This selection must agree with format selection in the third-party CineForm Codec
(NOT included with AJA KONA 3G) pulldown menu.
Audio Channels—The Audio Channel pulldown allows you to select the number of
embedded audio channels for the HDMI output
HDMI Output Formatting