Instruction manual

1
51
KONA 3G Installation and Operation Manual — Using The AJA Control Panel
Block Diagram Screen – the top area of the AJA Control Panel shows a visual picture
representing the processing (if any) that's currently occurring, including inputs/
outputs, any up/down/cross conversion, reference source, and system status. Lines
between inputs, the framebuffer, and outputs, show a video path. Where there are
no lines, it shows there is no connection; this can be either because an input or
output isn't selected or because no video is present at the selected input. The lines
will also show whether the input or outputs are single inputs/outputs or dual-link
(where two channels are used to carry the bandwidth of HD-SDI 4:4:4 video), and
whether output is video or video + key.
Icon objects on the block diagram screen (input/output icons, frame buffer, etc.-also
called “widgets”-indicate their status by color (explained later) and can be clicked for
context-sensitive information and choices. (These same choices can also be made
from the tabbed Control panel screens.)
AJA Control Panel, Block Diagram
Note: You can use the Up/Down arrows on your keyboard to navigate Tab selections
Control-Clicking
an Icon Produces
a Context-sensitive
Menu
Inputs
Outputs:
SDI, HDMI
and analog
Tab Screen Choices – Click One to Edit/View a Topic
Framebuffer
Format
(Primary Format)
Currently selected
Tab Screen