Instruction manual

1
39
KONA 3G Installation and Operation Manual — Installing the KONA 3G Card
Card Slots, PCIe Mac Pro shown here
Note: After you install the KONA 3G card, you may notice that in the MacOSX Network
preferences there is a message stating “You have a new network port named KONA 3G —be
sure to check the settings...”. There is no need to take any action. This occurs because
MacOSX detects the RS-422 serial port on the KONA 3G card that you will use for VTR
machine control.
Slot 3 is the preferred slot
on a MacPro for KONA 3G
PCIe card installation
PCI-Express Slots