Instruction manual

30
AJA Control Panel Setting for 3D Input
Muxed Single Stream Input—When capturing muxed stereo via a single SDI input, the
captured material will be “burned-in” and any codec can be used. If you use the CineForm codec
for “burned-in” muxed stereo, you will not be able to change playback modes using the
CineForm system menu.
3D Stereo Format
CineForm stereoscopic files, created using the CineForm FirstLight application or via AJA
stereo capture can be configured for a variety of stereoscopic outputs. The most common
formats for stereoscopic output are Side-By-Side or Top-Bottom (Stacked) formats.
With CineForm’s Neo3D software installed, a Codec Status output pulldown appears in the
Mac OSX Finder System menu where options like Side-by-Side may be selected.
Important: The CineForm stereo format selected must also be selected in the AJA HDMI
Setup menu shown below.