Instruction manual

94
Firmware Tab for
Standard Firmware
Update
Use the KONA 3G tab to access the firmware changeover screen. The Desired pulldown menu
allows you to select either:
• Standard Mode—for SD, HD, and 2K formats (allows up/down/crossconversion)
• 4K Mode—for SD, HD, 2K and QuadHD (3840x2160) and 4K (4096x2160) formats
(disables up/down/crossconversion)
Select Standard Mode and click install to erase 4K firmware and load the Standard Mode. Note
the Installation message shown below.
Firmware Changeover to 2K
You will be required to power-cycle your computer to finish the changeover.