Specifications

54
70.1 SCREEN SAVER
When set to “AJA Logo”, a rolling AJA logo screen saver will appear on the
alphanumeric display after 3 minutes of inactivity—defined as no button presses on
the front panel. When the Screen saver is on, the STATUS button or STOP button will
exit the screen saver.
Note: The screensaver will not appear if an active transport function is underway (e.g., Play,
Record, etc.).
70.2 DISPLAY INTENSITY
This parameter determines the brightness of the alphanumeric VFD display and front
panel backlit buttons.
70.3 FAN SPEED
This parameter determines the speed of Ki Pro’s internal cooling fan. In some
environments where audio recording is occurring close to the Ki Pro unit, it may be
desirable to set the fan speed to “QUIET RECORD” for optimum quiet operation.
80.1SERIAL NUMBER
This parameter displays this Ki Pro’s unique serial number.
80.2 SW VERSION
This parameter displays Ki Pro’s software version level.
99.0 FACTORY RESET
Selecting this parameter and then pressing the ADJUST (up) button for 2 seconds
recalls
Ki Pro’s factory default settings.
70.1 SCREEN SAVER ON (AJA LOGO —
default)
SYSTEM NAME
OFF
Display horizontally rolling AJA logo after 3 minutes of
button inactivity
Display the Ki Pro system name (defined in parameter
50.5).
Screen saver is disabled.
70.2 DISPLAY INTENSITY variable Using the adjust buttons, you can dim or brighten the
alphanumeric display and activity indicator LEDs in steps
from 1 (dim) to 8 (brightest)
Default: 6
70.3 FAN SPEED NORMAL (DEFAULT)
NORMAL AUTO
QUIET RECORD
QUIET AUTO
Fan runs at normal fixed speed for optimum cooling.
Fan runs at variable speeds for optimal cooling.
Fan runs at a fixed slower speed for optimum quiet.
Fan runs at normal speed until recording begins, then the
fan ramps down to a slower speed for optimum quiet.