Specifications

52
53.4 802.11 PASSWORD
This parameter defines the password used between Ki Pro, the access point and
wireless browser clients—if any.
53.5 HIDE 802.11 PASSWORD
This parameter determines whether the password set in 53.4 is visible from the front
panel or Web browser user interfaces.
Note: if you choose to hide the password (ON setting) and then switch the parameter back to
OFF, then the password will not be displayed. In order to see it again, you would need to
re-enter it.
54.1 802.11 IP CONFIG
This parameter determines the type of TCP/IP network configuration used by Ki Pro’s
wireless 802.11 transceiver.
Note: There is no timeout when editing—changes made will be saved and activated when
the menu is exited.
54.2 802.11 IP ADDRESS
This parameter determines the static IP address used by Ki Pro’s 802.11 transceiver.
Note: For parameters 54.2 and 54.3, you will be setting IP addresses that consist of “octets”
separated by a period (i.e., 90.0.181.0). When editing these, the Select button selects the
octet and then the Adjust buttons select the desired number. Pressing Select Up again
advances to the next octet. At the final octet, the address will flash—pressing Select Up at
that point confirms the setting. When these parameters are edited, you can abort the
editing process by backing out (press the Select down arrow button repeatedly until the
edit passes the first octet). You’ll notice that after completing the edit on the last octet,
the display will blink—this is an indication that the edited IP address is about to be saved.
You can save the edited IP address (press the Select arrow up to save) or choose not to
save by pressing the Select arrow down button.
53.4 802.11 PASSWORD variable Using the adjust buttons, enter a password for Ki Pro.
Using the adjust buttons and the top Select button, select
the characters for the password. The adjust buttons scroll
through the choices and the top Select button advances
to the next character. While selecting characters, the
character being changed will flash to show its position.
The character set allowed is: 0 through 9, '-','.', A through
Z (uppercase) and a through z (lowercase).
Maximum password length is 20 characters.
54.1 HIDE 802.11 PASSWORD ON
OFF (default)
Hide password (show characters as asterisks)
Display password.
54.1 802.11 IP CONFIG DHCP
STATIC ADDR (default)
Select automatic IP address assignment from DHCP
server in access point.
Assign a static IP address manually (parameters 54.2
and 54.3 will have to be entered to accomplish this).
54.2 802.11 IP ADDRESS variable Using the adjust buttons, enter an IP address compatible
with your access point (if you have one).This is only
needed for Static IP configurations.