Specifications

50
50.6 MAC ADDRESS
This parameter is an information only field showing the MAC address of the Ki Pro’s
ethernet adapter.
50.7 802.11 MAC ADDRESS
This parameter is an information only field showing the MAC address of the wireless
adapter.
53.0 802.11 AVAILABLE
This parameter shows all available 802.11 wireless networks detected by Ki Pro.
Choosing a network selects it for parameter 53.2. Note: security details for any
selected wireless network must be defined by the related parameters 53.3 through
53.5.
50.6 MAC ADDRESS information only display Selecting this parameter allows you to view Ki Pro’s
ethernet MAC address. The MAC address is a unique
value associated with the internal ethernet network
adapter. MAC addresses are also known as hardware
addresses or physical addresses. MAC addresses
uniquely identify an ethernet adapter on a LAN.
MAC address format: MM:MM:MM:SS:SS:SS
The value is 12-digit hexadecimal, where the first half
identifies the manufacturer and the second half identifies
the unique serial number. Ki Pro has two MAC
addresses: one for the 802.11 radio and one for the
ethernet adapter—parameter 25.0 shows the radio’s
MAC address.
50.7 802.11 MAC ADDRESS information only display Selecting this parameter allows you to view the Ki Pro’s
802.11b/g MAC address. The MAC address is a unique
value associated with the wireless radio’s internal
network adapter. MAC addresses are also known as
hardware addresses or physical addresses. MAC
addresses uniquely identify an ethernet adapter on a
LAN.
MAC address format: MM:MM:MM:SS:SS:SS
The value is 12-digit hexadecimal, where the first half
identifies the manufacturer and the second half identifies
the unique serial number. Ki Pro has two MAC
addresses: one for the radio and one for the ethernet
adapter—parameter 50.6 shows the ethernet MAC
address.
53.0 802.11 AVAILABLE information display Choosing this parameter allows you to view 802.11
wireless networks within signal range of Ki Pro. The
Adjust buttons allow you to scroll up or down to view
those available. If you find one that you want to connect
Ki Pro to, then select it via the Adjust buttons and it will
then transfer to parameter 53.2 (802.11 NETWORK) as
the selected wireless network.