Specifications

1
47
Ki Pro Installation and Operation Manual — CONFIG menus
8.1 TC VALUE
This parameter selects an hour for timecode to start.
8.2 TC TYPE
This parameter selects drop frame or non-drop frame timecode.
8.3 ARM RECORDING
This parameter selects how recording will begin: either by pressing record button (or
web “Record” button) or via timecode. If starting on timecode, parameters 8.0, 8.1. and
8.2 must be set to qualify the source and type of timecode.
41.1 VIDEO SG FRMT
This parameter determines the video format output from Ki Pro’s internal test signal
generator. This parameter is used with parameter 41.2 to determine the type of video
test signal output by Ki Pro.
41.2 VIDEO SG
This parameter determines the video signal output from Ki Pro’s internal test signal
generator. This parameter is used with parameter 41.1 to determine the type of video
test signal output by Ki Pro.
8.1 TC VALUE 1 to 23 Use the ADJUST buttons to select a timecode hour.
For example:
01:00:00:00,
“02:00:00:00, etc.
8.2 TC TYPE NDF (default)
DF
Selects Non-drop Frame timecode
Selects Drop Frame timecode
8.3 ARM RECORDING REC KEY
TC/REC KEY (default)
Start Record button is pressed
Start on Time Code or Record button
41.1 VIDEO SG FRMT 525i 29.97
625i 25
720p 50
720p 59.94
1080PsF 23.98
1080i 25
1080i 29.97
Select the video format desired for test signal output.
41.2 VIDEO SG OFF (default)
Black
75% Bars
100% Bars
Turn test signal output OFF.
Video test signal output is color black.
Video test signal output is 75% color bars. This 75%
amplitude,100% saturation test signal is useful to check
low frequency response and video tilt as well as the
performance of video clamping.
Video test signal output is 100% color bars. This 100%
white full field bars test signal is helpful to check chroma
amplitude versus overall video level.