Specifications

1
43
Ki Pro Installation and Operation Manual — CONFIG menus
1.7 COMPONENT OUT
This parameter defines whether the component video output matches the file format
or has the 1.5 OUT CONVERT selection applied to it.
1.8 HDMI OUT
This parameter defines whether the HDMI output matches the file format or has the 1.5
OUT CONVERT selection applied to it.
2.1 VIDEO INPUT
This parameter selects a video input source from the video input connections available.
This is the video that will be recorded and/or passed through.
2.2 AUDIO INPUT
This parameter selects an audio input source from the audio input connections
available, including embedded SDI audio which requires an SDI video source and HDMI
audio, which requires and HDMI video source.
Note: XLR input could be microphone level or line level, depending on the connector panel
switch setting.
3.1 COMPONENT IN LVL
This parameter selects the input level for signals applied at the component video input
connectors.
1.7 COMPONENT OUT FILE FRMT (default)
OUT CONVERT
Output with the same format as the file
Output using the selection in 1.5 OUT CONVERT
1.8 HDMI OUT FILE FRMT (default)
OUT CONVERT FRMT
Output with the same format as the file
Output using the selection in 1.5 OUT CONVERT
2.1 VIDEO INPUT SDI (default)
HDMI
COMPONENT
Selects SDI input connector
Selects the HDMI input connector
Selects the Component input connectors
2.2 AUDIO INPUT SDI (default)
RCA
XLR
HDMI
Selects SDI embedded audio from the SDI input
connector (if SDI video input is selected)
Selects the two RCA jacks (stereo pair) for audio input
Selects the XLR input for audio input
Selects HDMI embedded audio (if HDMI video input is
selected)
3.1 COMPONENT IN LVL SMPTE/N10 (default)
BETACAM
Selects SMPTE/N10 input signal levels
Selects BETACAM input signal levels