Specifications

1
29
Ki Pro Installation and Operation Manual — Remote Network Control
• Select a wireless network to connect to (as set on the access point you’ll
communicate with).
• Select the type of security, if any, to be used. If there is security, you’ll also enter its
password.
• Once configured, you can control Ki Pro from an iPhone or other 802.11 wireless
device that supports browser control (iPod Touch et al).
Wireless control of Ki Pro is managed using menus 53.1 through 53.5 as listed in
Chapter 3, under Config Menu Parameters. The steps of setting up and using Wireless
control are then discussed later in Chapter 4 under Browser Remote Control.
Warning!
Install this device in such a manner as to maintain a minimum of 5 cm (2 inches)
separation distance between the radiating element(s) and all persons. This safety
warning conforms with FCC radio frequency exposure limits.
Caution!
The 802.11b/g radio is disabled by default and can be enabled only in the presence
of an authorized access point.
Warning!
Intentional radiators, such as the AJA Ki Pro client adapter, are not intended to be
operated with any antenna(s) other than those furnished by AJA. An intentional
radiator may only be operated with the antenna(s) with which it is authorized.