Specifications

Note: ExpressCard Memory is not supported in Ki Pro versions 1.0, 1.0.1, or 1.1.

Visit the Ki Pro support page on our website for a list of AJA-qualified cards:

http://www.aja.com/support/ki-pro/ki-pro.php

Head Phone Jack—1/8” (3.5mm) miniature stereo TRS connection for standard

stereo headphones.

Connector Side

Connect any camcorder, camera, or audio source—digital or analog—regardless of

brand or format, to Ki Pro’s many connectors. The connector side of Ki Pro contains

almost all of the available connections, protected by handles that extend out for easy

grip while protecting the connectors when out of the Exo-skeleton. On the back side

of the unit is a single power connector for supplying the 12-Volt DC operating

voltage (see installation later in this chapter).

The function of Ki Pro’s inputs and outputs depend on the operational mode. Ki Pro’s

active input (the one to be recorded) is selected by front panel, web browser, or

wireless device browser. Ki Pro’s outputs are active all the time. In other words, the

same output video appears simultaneously on the HDMI, SDI, component, and

composite outputs. (Note: composite is an SD only format, so it will not output HD

material.) This method of operation allows simultaneous connection to source

devices, onset monitoring displays, and audio equipment.

Ki Pro Connector Side and Back Side

Connections • HDMI—v1.1 video with embedded audio (2 channels input, 8 channels output ),

1x connector for input and 1x connector for output.

• HD/SD-SDI Input and Output, with 8 channel embedded audio (2x BNC)

Note: Though Ki Pro SDI and HDMI support 8 channel embedded audio in E-to-E, only 2

channels can be captured and played back at this time.