Installation & Operation Guide Version 10.
Table of Contents Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Copyright . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Contacting Support . . . . . . . . . . . . . . . . . . . .
Chapter 4: Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50 If You Run Into Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Updating Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Notices Trademarks AJA®, KONA®, Ki Pro®, KUMO® and XENA® are registered trademarks of AJA Video, Inc., Ki Pro Mini™, Io Express™, Io HD™, Io™ and “Work. Flow.” are trademarks of AJA Video, Inc. AirPort, Apple, the Apple logo, AppleShare, AppleTalk, FireWire, iPod, iPod Touch, Mac, and Macintosh are registered trademarks of Apple Computer, Inc. Final Cut Pro, QuickTime and the QuickTime Logo are trademarks of Apple Computer, Inc.
Chapter 1: Introduction Overview AJA's Io XT provides professional-grade I/O for high-end computers using a Thunderbolt interface with 10Gbps available bandwidth. Io XT is the ideal portable companion for lightning-fast video capture, playback and up/down/cross conversion. Designed for today’s workflows, Io XT provides a new interface for video Pro's working with 10-bit uncompressed, Apple ProRes 422, Apple ProRes 422 (HQ), XDCAM HD, DVCPRO HD, stereoscopic 3D workflows, and more.
• Dynamic RT Extreme hardware acceleration • Broadcast quality hardware-based 10-bit SD aspect ratio conversion (anamorphic to letterbox, etc.
For example, to do a down-conversion on an HD input: Set the Primary Format as an SD format Select the correct HD format with an (I) input designation for the Secondary Format, then Choose a “– Secondary” Video Input type Down-conversion display mode choices that may be available include: • Anamorphic: full-screen • Letterbox: image is reduced with black top and bottom added to image area with the aspect ratio preserved • Crop: image is cropped horizontally to fit new screen size This parameter applies to u
• AJA Control Panel for source selection and controlling Io XT within either Mac or Windows environment, Input Pass through, and more. AJA Control Panel uses a block diagram to show visually what is happening inside Io XT. • Supports popular 3rd-party Professional Video Applications from Adobe, Avid, Apple, Telestream, and more. NOTE: For a complete software compatibility list, see the AJA website link: http://www.aja.
When you unpack your AJA Io XT, you’ll find the following components: • Io XT • 12V power adapter and power cord • Read Me First Notice—Contains late-breaking news and/or errata related to Io XT and the documentation. • Registration Sheet—allows you to register your Io XT by mail or online (details provided). Cable Connections Io XT connections are made directly to the unit’s rear connector plate. Eight audio output channels are available through the Tascam-style DB25 connector. Figure 2.
The AJA Control Panel allows selection and adjustment of some HDMI parameters; please see Chapter 3—for more information on Control Panel operation. RS422 Machine Control A female DE-9 connector on Io XT provides connection for VTRs, camcorders, disk media servers, and other devices using RS422 SMPTE (Sony) protocol. (Connector pinout is listed in Appendix A, see “Machine Control” on page 54.
Chapter 2: Installation Installation Overview The installation and set up of an Io XT is very simple. The steps of installation and configuration are outlined here and each of these steps are explained in greater detail on the remaining pages of this chapter: 1. Unpack the shipping box (see " What’s In The Box? on page 8".) 2. If not previously installed on your Thunderbolt equipped computer, ensure that appropriate application software is installed as detailed in its user documentation. 3.
Connecting to your Computer 1. With your computer off, connect a Thunderbolt cable to one of the two Thunderbolt ports 2. Connect the other Thunderbolt port to storage or other desired peripherals. 3. For power either: • Assemble the Power Adapter and cable and connect to the Io XT 12V Power connector and to AC supply • Or connect a 12 volt battery using an XLR connector (not included). 4. Connect your desired Video I/O, Audio monitoring, reference, and machine control cables.
5. Use a Tascam-style audio breakout cable to connect stereo output for audio monitoring. Figure 4. Typical Thunderbolt Compatible Laptop System Connections Io XT v10.4 13 www.aja.
Installing Io XT Software Go to the AJA website and download the latest Io XT driver software containing the AJA Control Panel application. While there, also download any AJA plug-ins for 3rd-party applications (such as Adobe and Avid). All of these software installers can be found here: http://www.aja.com/en/support/downloads/ System software updates may occasionally become available to AJA Io XT owners on our website (www.aja.com).
1. Locate Io XT software downloaded from AJA. 2. Double-click the package to log on and begin software installation. Start by installing the Io XT driver package with AJA Control Panel and then finally install any AJA plugins for 3rd-party software. NOTE: The system will respond by asking you to authenticate who you are as currently defined on your OS X user profile.
Figure 7. Initial Installer Screen 7. Click Continue to begin installation. 8. The next screen lets you know that the installer will check your Mac to ensure it has the hardware and software resources required (“System Requirements” on page 8). Figure 8. System Check Installer Screen Io XT v10.4 16 www.aja.
9. Read and agree to the Software License Agreement. Figure 9. Io XT Software License Agreement Screen 10. The next screen shows all the available drives on the Mac Pro. Click on the drive that contains your system files (Apple default is “Macintosh HD”). A green arrow will point to the drive you’ve selected. Click the Continue button to proceed with installation. 11. At the next screen, select the “Io XT Setups” checkbox.
Figure 10. Installer Screen, Select Easy Setups to be Installed 12. The installer tells you how much room the installation will take and prompts you to click Install to begin (or go back). Click the Install button to proceed. Figure 11. Installer Screen, Space Reminder 13. Next, the system will display a reminder that you’ll have to Restart the Mac after installation concludes. Click Continue Installation. Io XT v10.4 18 www.aja.
Figure 12. Installer Screen, Reminder about Restarting 14. The installer runs and puts all the necessary Io XT drivers and software on the desired hard drive. When it has completed installation, a final screen will be displayed announcing that “software was successfully installed.” Figure 13. Installation Success and Restart Message 15. Click the Restart button to complete the installation procedure. The system will perform software restart. Io XT v10.4 19 www.aja.
16. After installing the Io XT system driver package, install the AJA Control Panel package in the same fashion, following each screen and continuing to the next until installation completes. 17. Finally, install any AJA plug-ins required for 3rd-party software. You can download these from the AJA website: http://www.aja.com/en/products/io-xt/#support 18.
Figure 15. License Agreement Read the Windows Software license agreement and click “Yes” to accept. You will be asked to choose the type of installation you would like to perform. Click on the Custom button to see the installation options. The default selections include AJA Drivers for KONA cards, Io Express/XT, and T-TAP. Software not installed is marked with a red X. You may choose to perform a Custom installation to select the specific software necessary for your applications.
Figure 16. Custom Installation Window The following screens depict the more elaborate Custom installation. Shown below are the pull-down options. Click (triangle) to expand or contract. Figure 17. Installation Item Selection You may deselect any Item for installation by using the pulldown to make it unavailable. Before clicking Next to install, you can verify your disk space availability by clicking the Disk Usage button. Io XT v10.4 22 www.aja.
Figure 18. Workstation Disk Usage Display To return to the installation click OK. Click Next to begin the installation. Figure 19. Installation Progress Screen Io XT v10.4 23 www.aja.
When the installer has completed copying the AJA Windows Software to disk, you will see a standard Windows Logo test warning. Click on the “Continue Anyway” button to finish the installation. When the installation is completed, a final screen will be displayed announcing that “Setup has finished installing AJA Windows Software on your computer.” Click on the Finish button after the installation is complete. Restart the computer after installation to activate the Io XT.
Chapter 3: Operation Using Io XT with Professional Video /Audio Software After you install the Io XT software and any AJA plug-ins to support your choice of 3rd-party software, you’re then ready to begin capturing and playing back video and audio. Go here to look for AJA plug-ins and documentation for your favorite 3rd-party software applications: http://www.aja.
To ensure you make the most of the software, launch the AJA/Io XT Control Panel application and look at its display. Then refer to the “Basics” described here to fully understand what you’re seeing and learn how to view and change the Io XT system configuration. Block Diagram Screen The top area of the Control Panel shows a visual picture representing the processing (if any) that’s currently occurring, including inputs/outputs, reference source, and system status.
Framebuffer: The framebuffer is the “memory” in Io XT where your third-party applications interface with the hardware. The framebuffer has a format (called the “Primary Format” and color space that it follows, as defined in the linked menu screens or via external application software. It is important to realize that the computer can contain many applications that can use the Io XT (as you switch from window to window) and it may not always be obvious which currently controls it. Figure 22.
Secondary Format: Any format other than the currently selected Primary Format, is a secondary format. As described previously, this means that either the Inputs or Outputs are somehow different from the framebuffer’s assigned format (i.e., the “Primary Format”). This can be seen at a glance because the color will be differ from blue. In the example below, a secondary format of 720p59.94 is selected on the Format screen and is then used for output at SDI 2. Figure 23.
Control Panel Screens: The side area of the Io XT Control Panel provides different information categorized by topics. Clicking on a topic—or a block diagram element—displays an information screen corresponding to that topic. Screens that can be selected are: Control: configures Io XT operation and output timing.
Control Panel Operation Control Screen The Io XT can be controlled by various software applications running on a host Mac. The Control screen is where you select how the Io XT directs video and is used by application software. This screen also provides control for configuring output timing with regard to external reference video and horizontal/vertical delay. At the top of the Control screen it will show the current Default Output and the application currently controlling the Io XT. Figure 26.
AJA Control Panel need to be open to convert audio and video from one format to another. For example, if an SD source tape needs to be dubbed to an HD tape, the signal might be routed from the SD VTR to the Io XT, configured for up-conversion in the AJA Control Panel and then passed through to the HD VTR for recording. • Test Pattern: this selection directs Io XT to output a choice of preset pattern when no other application is using the Io XT.
Format Screen The Formats screen shows the video format currently in use by the Io XT framebuffer (called the Primary Format) and allows you to change it. All throughout the Control Panel, choices are always presented based on what Io XT can do with the signals available and the inputs/outputs selected.
are working with progressively segmented frame formats (sf in the AJA Control Panel) as compared to progressive frame formats which will show only “p.” RGB Range: The RGB Range pulldown menu allows you to select either Full range (0-1023) or SMPTE range (typically 64-940) for RGB color output. VANC Checkbox.: When checked ON, the VANC checkbox tells the Io XT to capture and process any ancillary data in the SDI stream. This can include Closed Captioning data, and other types of metadata.
Figure 28. AJA Control Panel, Formats Screen, Example shows cross-conversion Io XT v10.4 34 www.aja.
Input Select Screen On the Inputs screen you can view the currently selected video and audio input sources and map audio sources to the channels supported by your editing application. Two information panes in the screen are provided: Video Input and Audio Input. Figure 29. AJA Control Panel, Inputs Screen Input Select Settings Video Input: The pulldown menu allows you to see and change what's currently selected and the video format that Io XT has detected (if any).
SDI Output Screen The SDI Output screen shows the current settings for both of the SDI outputs. Because the outputs can be configured independently, one output may be the Primary format and the other output may be the Secondary format. If an input/output has no video, it will be indicated on the block diagram (“No Video”). 3D Stereoscopic Through SDI, you can output Discrete Left and Right Eye feeds with a simple Stereo Workflow button choice in the AJA Control Panel.
Video+Key: When selected, this indicates that the SDI 1 Output video is set to the same format as the framebuffer. SDI 2 Output is set to a video key signal associated with SDI 1 (the shape to be cut out from the video - this will appear as a black and white image/matte). Using the second Io XT output as an Alpha Channel key, with the video output, may be useful for feeding production switchers, DVEs or other professional video equipment. Figure 31.
HDMI Screen The Io XT’s HDMI input and output are shown and configured at this screen. Figure 32. AJA Io XT HDMI, HDMI Screen HDMI Output Settings The Source pulldown menu allows you to select either the primary video format (framebuffer) or a secondary one (up/down/cross-conversion). Pulldowns are also provided for configuring the video output range, color space and number of embedded audio channels (2 or 8) for the HDMI output.
Analog Out Screen Io XT provides a high-quality analog component or composite + Y/C output, generally used for monitoring. This screen shows the current settings for that analog output, and allows you to re-configure it when desired (format and black-level). Figure 33.
Video Setup Screen Io XT provides a high-quality analog component or composite output, generally used for monitoring. This screen shows the current settings for that analog video output, and allows you to re-configure it when desired. Figure 34. AJA Control Panel, Video Setup Screen Setup Screen Settings Analog Black Level: Choices available for Black Level are the two Composite analog formats. Choices presented are for US or Japan: • 7.
Audio Setup Screen This screen shows the current settings for the analog audio output, allowing you to reconfigure it when desired. Figure 35. AJA Control Panel, Audio Setup Screen Audio Setup Screen Settings Lock Audio Gain To Unity: When set, the Io XT will ignore the third-party application’s gain setting and set the audio gain at unity. When not set, this checkbox tells the Io XT to get the audio gain setting from the editing application (if supported).
Conversion Screen (Mac OS only) NOTE: This screen offers controls that determine how the card behaves with 3rd-party applications. This screen is present in the Mac version of AJA Control Panel only and not all applications support these functions. Figure 36. AJA Control Panel, Conversion Screen Pause On: These two choices determine what happens when the editing application is paused in stop mode: Full Frame: both fields are displayed resulting in some jitter while paused.
Figure 37. Conversion Screen Frame-padding Pattern Choices YUV-RGB Conversion Colorspace: These pulldowns select industry standard color space and gamma transfer functions for the YUV-RGB conversion, or allow you to direct Io XT to automatically determine it for you. Choose from: • Rec 601 • Rec 709 • Auto Gamma: Choose from the following: • Linear (1.8) • Rec 601 (2.20) • Rec 709 (2.22) • Auto RGB Range: Enable Custom LUTs: Io XT v10.
DS Keyer Screen The Io XT has a hardware-based downstream keyer that is ideal for putting logos, “bugs” or other video material with an alpha channel on top of video being played out or printed to tape. A typical application would be putting a television station's call letters or channel over program video content. Keyed video can be from the Io XT internal Frame Buffer (from storage, video In, etc.) or from a graphics file that has an alpha channel (PhotoShop etc.). Figure 38.
Matte Color Foreground pre-multiplied (checkbox) Only available when the pulldown “Frame Buffer over Matte” or “Graphic over Matte” are selected-pressing this button brings up a color selection dialog. The dialog provides a variety of ways to select a matte color including a color wheel, color picker (choose from a location anywhere on the computer screen), numeric sliders, swatches, “crayons”, and spectrums. The matte chosen will be used as a video background under the keyed video.
Timecode Input Settings RP-188 Timecode : User Bits: In RP-188 timecode (SMPTE 12M-2) there can be multiple timecode values in the data stream. Use this pull-down to select the one you wish to monitor. The selection will be displayed in the timecode value displayed to the right of the pull-down. For monitoring variable framerate (VFR) timecode (such as Varicam), you may wish to monitor the user bits embedded in the timecode.
Presets Screen After configuring the AJA Control Panel screens, you can then save all your settings as a snapshot for later recall—called a preset. In this way, you can organize presets for all your typical tasks, eliminating time-robbing manual reconfiguration each time. To save a preset, simply go to the Presets screen and click “Save Preset”. A dialog will be presented asking you for a name; enter a meaningful name and click “OK”.
Firmware Screen Use the Firmware screen to access the firmware install screen. Click install to erase current firmware and load the firmware version contained in your current driver installation. Note the Installation message shown below. Figure 42. Firmware Update You will be required to power-cycle your computer and Io XT to finish the update. Figure 43. Update Completed Io XT v10.4 48 www.aja.
Info Screen This screen shows the Io XT software files that have been installed on your system. This information may be needed if you talk to an AJA Customer Service representative to determine if files are missing or need updating. Figure 44. Information Screen in Standard Mode Io XT v10.4 49 www.aja.
Chapter 4: Troubleshooting If You Run Into Problems One useful way to find the source of problems is to isolate your system to the smallest size where the problem still occurs and then note all the symptoms. This serves to eliminate areas not involved in the problem and makes finding the problem easier. Once you’ve noted problem symptoms, look through the following table and see if any of the symptoms are listed. If so, check the items listed.
Support When calling for support, first check over your system configuration and ensure everything is connected properly. Even if you cannot find the cause of the problem, having this information at hand will help when you call AJA Customer Support for help. If the problem is unknown or you need general help, first contact the dealer where you purchased the product. AJA dealers offer product support for many service requirements.
Appendix A: Specifications Video Formats • • • • • • • • • Software-dependent Formats: 525i 29.97 525i23.98* 625i 25 720P 23.98*, 24 *, 25 *, 29.97*, 30 *, 50, 59.94, 60 1080i 25, 29.97, 30 1080PsF 23.98, 24, 25, 29.97, 30 1080p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60 2Kx1080p 23.98, 24, 25 2Kx1080PsF 23.98, 24, 25 * These formats are dependent on specific software functionality and are not normal 'over-thewire' formats. 720P 23.98, 24, 25, 29.
• <1% Diff Gain • <1 ns Y/C delay inequity Audio Input Digital • 16-channel, 24-bit SMPTE-259 SDI embedded audio, 48kHz sample rate, Synchronous • 8-channel, 24-bit HDMI embedded audio, 48kHz sample rate, Synchronous Audio Output Digital • 16-channel, 24-bit SMPTE-259 SDI embedded audio, 48kHz sample rate, Synchronous • 8-channel, 24-bit HDMI embedded audio, 48kHz sample rate, Synchronous Audio Output Analog • 8-channel, 24-bit D/A analog audio, 48kHz sample rate, balanced (via 8 x XLR on DB-25 breakout
Cross-conversion • • • • Hardware 10-bit 1080i to 720P 720P to 1080i 720P to 1080PsF SD to SD aspect ratio conversion Letterbox: This transforms SD anamorphic material to a letterboxed image H Crop: Will produce a horizontally stretched effect on the image; transforms anamorphic SD to full frame SD Pillarbox: Will produce an image in the center of the screen with black borders on the left and right sides and an anamorphized image in the center V Crop: Will transform SD letterbox material to an anamorphic
Appendix B: Safety and Compliance Federal Communications Commission (FCC) Compliance Notices Class A Interference Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15, Subpart B of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a commercial installation.
European Union and European Free Trade Association (EFTA) Regulatory Compliance This equipment may be operated in the countries that comprise the member countries of the European Union and the European Free Trade Association.
Achtung! Dieses ist ein Gerät der Funkstörgrenzwertklasse B. In Wohnbereichen können bei Betrieb dieses Gerätes Rundfunkstörungen auftreten, in welchen Fällen der Benutzer für entsprechende Gegenmaßnahmen verantwortlich ist. Attention! Ceci est un produit de Classe B. Dans un environnement domestique, ce produit risque de créer des interférences radioélectriques, il appartiendra alors à l’utilisateur de prendre les mesures spécifiques appropriées.
Japanese Compliance Statement This is a Class A product based on the standard of the VCCI Council (VCCI V-3/2008.04). If this equipment is used in a domestic environment, radio interference may occur, in which case, the user may be required to take corrective actions. Translated caution statements, warning conventions and warning messages The following caution statements, warning conventions, and warning messages apply to this product and manual.
Avviso! Leggere e seguire tutti gli avvisi e le istruzioni presenti sul prodotto o inclusi nella documentazione. Warning! Do not use this device near water and clean only with a dry cloth. Avertissement! N'utilisez pas cet appareil près de l'eau et nettoyez-le seulement avec un tissu sec.. Warnung! Das Gerät nicht in der Nähe von Wasser verwenden und nur mit einem trockenen Tuch säubern. ¡Advertencia! No utilice este dispositivo cerca del agua y límpielo solamente con un paño seco.
Aviso! Não instale perto de nenhuma fonte de calor tal como radiadores, saídas de calor, fogões ou outros aparelhos (incluindo amplificadores) que produzam calor. Avviso! Non installare vicino a fonti di calore come termosifoni, diffusori di aria calda, stufe o altri apparecchi (amplificatori compresi) che emettono calore. Warning! Refer all servicing to qualified service personnel.
Achtung! Dies ist ein Gerät der Klasse A. Bei Einsatz des Geräts in Wohngebieten kann es Störungen des Radio- und Fernsehempfangs verursachen. In diesem Fall muss der Benutzer alle notwendigen Maßnahmen ergreifen, die möglicherweise nötig sind, um die Störungen auf eigene Rechnung zu beheben. ¡Precaución! Este es un producto clase A.
Warning! Only use attachments and accessories specified and/or sold by the manufacturer. Avertissement ! Utilisez seulement les attaches et accessoires spécifiés et/ ou vendus par le fabricant. Warnung! Verwenden Sie nur Zusatzgeräte und Zubehör angegeben und / oder verkauft wurde durch den Hersteller. ¡Advertencia! Utilice solamente los accesorios y conexiones especificados y/o vendidos por el fabricante. Aviso! Utilize apenas equipamentos/acessórios especificados e/ou vendidos pelo fabricante.
Avviso! Non compromettere la sicurezza della spina polarizzata o con messa a terra. Una spina polarizzata ha due spinotti, di cui uno più largo. Una spina con messa a terra ha due spinotti e un terzo polo per la messa a terra. Lo spinotto largo o il terzo polo sono forniti per motivi di sicurezza. Se la spina fornita non si inserisce nella presa di corrente, contattare un elettricista per la sostituzione della presa obsoleta.
Warning! Unplug this device during lightning storms or when unused for long periods of time. Avertissement ! Débranchez cet appareil pendant les orages avec éclairsou s'il est inutilisé pendant de longues périodes. Warnung! Das Gerät ist bei Gewitterstürmen oder wenn es über lange Zeiträume ungenutzt bleibt vom Netz zu trennen. ¡Advertencia! Desenchufe este dispositivo durante tormentas eléctricas o cuando no se lo utilice por largos periodos del tiempo.
Achtung! Um eine fehlerfreie Arbeit sicherzustellen, schalten Sie Io XT ein, bevor Sie den Computer starten, und fahren Sie den Computer herunter, bevor Sie Io XT ausschalten. ¡Precaución! Para un correcto desempeño, siempre encienda Io XT antes de iniciar la computadora y apague la computadora antes de apagar Io XT. Cuidado! Para o desempenho correto, sempre ligue o Io XT antes de ligar seu computador e desligue o computador antes de desligar o Io XT.
Warranty and Liability Information Limited Warranty AJA Video warrants that the product, not including hard-disk based Storage Modules (HDD), will be free from defects in materials and workmanship for a period of three years from the date of purchase. AJA Video warrants that the hard-disk based Storage Modules (HDD), will be free from defects in materials and workmanship for a period of one year from the date of purchase.
Limitation of Liability UNDER NO CIRCUMSTANCES SHALL AJA VIDEO BE LIABLE IN ANY WAY FOR ANY LOST, CORRUPTED OR DESTROYED DATA, FOOTAGE OR WORK, OR FOR ANY OTHER INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR FOR ANY THIRD PARTY CLAIM, IN CONNECTION WITH THE PRODUCT, WHETHER RESULTING FROM DEFECTS IN THE PRODUCT, SOFTWARE OR HARDWARE FAILURE, OR ANY OTHER CAUSE WHATSOEVER, EVEN IF AJA VIDEO HAS BEEN ADVISED OF THE POSSIBLITY OF SUCH DAMAGES.
Index Numerics 24 frames-per-second to 30 conversion 42 3D output 38 9-pin D-connector 54 A alpha channel 44 alpha channel, Video + Key 37 analog audio 41 analog audio output 39 analog component 40 analog component output 39 analog composite 40 Analog Format 39, 40, 42 Analog Out Screen 39 Analog Out Screen Settings 39, 40 Anamorphic 33 anamorphic SD to full frame SD 33 aspect ratio conversion 33 Audio 7 Audio Input 35 audio input, pulldown menu 35 Audio Out 45 D DB9 12 DE9 10 Default Kona Output 30 Digit
P Graphic over Matte 44 Graphic over Video In 44 Green 27 pattern, test 31 Pillar box 33 Pillarbox 33 pinout, RS-422 D-connector 54 Presets 47 Primary 36 Primary Format 27 Primary format 10 problem symptoms 50 problems, what to do if you encounter 50 progressive frame 33 progressive segmented frame 32 psf 32 H H Crop 33 Hardware 7 HDMI audio output 38 HDMI output 38 Hold Last Application 31 Horizontal reference 31 horizontally stretched 33 house reference 10 house reference sync 12 house sync 24 Q I Q
Specifications 52 Support 51 support 51 Symptoms, problem 50 sync generator 10 synchronizing other video equipment 10 system configuration, Control Panel 26 System Connections 13 System software 14 T Test Pattern 31 Timecode Offset 46 Timecode Screen 40, 45 Timecode Screen Settings 46 timing adjustment 31 Timing adjustment, Control Panel 31 troubleshooting 50 U unpack 9 upconversion 33 upconverter 6 Updating Software 50 Use 48 user and password 15 User Bits, RP-188 46 V V Crop 33 Vertical reference 31 Vi
